- Input: 100-240v 50-60Hz
- Output: DC 12V 1500mA
- Charge Current: 100mA Per Channel
- Brand: Tenergy
- Designed with 10 independent circuit units, so that you can charge 1-10 batteries.
- Constant charging current mode, trickle current when fully charged.
- Reverse polarity protection. It automatically terminates charging and the LED flashes red when the polarity is reversely connected
- UL approved AC adapter.
- Negative Delta V Cut off Detection.
- LED lights turn to red for each battery when charging and off when complete
- Excellent for highly drain electronic devices like remote controller, medical and microphones.
- NiCd 8.4v 120-140mAh -> 1 to 2 hours
- NiMH 8.4V 170-325mAh -> 2 to 4.5 hours
- NiMH 9.6V 160-220mAh -> 2 to 3 hours
- Size: 9 Volt
- Capacity: 220 mAh
- Chemistry: Nickel Metal Hydride (NiMH)
- Voltage: 8.4
- Brand: Acculoop
- Type: Low Discharge
- Included Qty: 10
- No memory effect
- Reliable service life
- Long-Lasting Performance
- Recharges up to 1000 Cycles
- Saves you hundreds of dollars compared to Alkaline batteries
- Can be replaced in any product that uses 9 Volt Batteries
Ideal for the following applications:
- Remote Controls
- Power-hungry Equipment
Note: (Low Discharge): These Batteries come pre-charged, and can maintain 85% of their charge even after a year in storage or standby.
Today's Crazy Special: